The instruction below will help
instruction below will help people who try to sew the hair for their dolls. You
can adjust the steps based on your personally habits.
to choose the weft hair
To set curly hair is more
difficult than to set straight hair, so if you’re a novice, we’ll recommend you
to use straight weft hair for your first trial.
Also, straight hair can be variable. It can be varied to many kinds of hair
styles by low-temperature perm machine. If you don’t know how to perm it by
yourself, you can choose the formed curly weft hair as follows.
When making the hair
curly, the hair is premed bunch by bunch with hair curlers, so after using, hair
will be a little messy. Sewing the hair done, you have to roll it back in the
direction of the wave. You might as well use some hair treatment to make it
smoother and easier to set if necessary.
The introduction of Cool Cat Blythe scalp
Scalps from origin are
harder and thinner with holes on them. They are easily to be broken after
pulling and dragging many times due to the holes.
On the contrary, there is
no hole on our scalps. They are soft and thicker than those of origin. Scalps
without holes can effectively reduce the happening of breakage.
that you need
Scalp, needle, thread,
weft hair 2~3 packs, pincher, elastic band
You can color the scalp
according to your needs. Acrylic paint are better.
（1）Choose the same color threads and Acrylic colors with the weft hair.
（2）Sewing from down to
top.(i.e. from edge to top of scalp) You can choose to cut the weft hair and sew
it on the scalp layer by layer, or not to cut the hair but sew it in spiral way.
( there’s no special request on sewing method, as long as you can combine the
weft hair with scalp.)
（3）The distance between
hair layers maintains around 1cm. Each stitch also maintains 1cm distance from
others.( Depending on personal preference, if you prefer thick hair, you can
shorten the distance to make hair layers closer.)
sewing the top, please shorten the distance between layers in order to increase
the hair volume, and avoid looking bald.
how to make the
top of head
（1）Take a length of
10~15cm weft hair, bind it to a bunch, and fix it by thread.
（2）Pierce a 0.5cm diameter
hole right in the middle of the scalp. (scalp is flexible, do not need a big
（3）Insert the bunch of
weft hair in the hole and apply the glue inside the scalp to fix the hair.
how to make the bangs
Separate from the middle,
using the elastic band to pinion weft
Iron the hair through a
layer of cloth in low temperature. Every time takes 2~3 minutes to iron. Total
around 5-6 times. Do not take off the elastic band until the next day. If the
hair is still not natural, repeat the steps above.
to fix the scalp on the head
glue along the inside edge of scalp, pay attention to the front-back
directions, put the scalp on the head, and tie the scalp and head with elastic
band. Then wait for the glue dry.
If the thickness of weft
hair is too thick to stuff, you can use a pincher to assist.
Do not use a hair dryer.
It will damage the weft hair.
Do not directly iron the
weft hair. It will cause damage.