DIY Soft Scalp Designed Specifically for Hair Sewing
A new material of soft PVC is used
for the scalp. It has a natural and soft color tone with an elastic and
skin-like touch. The sealing is much better and the tenderness is moderate,
which makes hair sewing easy even without punched holes.
Suitable for Middie
Blythe Only, perfect for Blythe collectors who often perform hair transplants
for their dolls
Materials used: Environmental protection Soft PVC material
(>> SGS test report reference <<)
Note:PVC materials have a bad smells when it is new. but
smells will dissipate with time, Please make sure before order, thank you.
Direction:
It has three mortises at the inside for the
insertion of the head dome base. To complete the assembling, please make sure
that the mortises are matched precisely and passed through entirely.
Markings have been made to indicate the front and back of the cap. “F” denotes
the front side and “B” denotes the back side. Please pay attention to these
markings while sewing
The cap can be dyed (there are a wide variety of paints available, please try
them out before applying it to the cap)
The key areas for optimal adhesion are the front and both sides at the base line
near the edge of the cap
Note:
*The size and details of the scalp have been modified, and thus they differ
from those of the original manufacturer. Please acknowledge this fact prior to
the purchase. Thank you.
*Please be aware that a small degree of variance in color may exist in each
production. Please acknowledge this fact prior to the purchase.
Caution:
*Though the product is heat-resistant, do not place it near sources of extreme
heat
*Due to the characteristics of the materials used, the product may shrink under
extreme heat
*The cap has been remade of the original model; therefore it is slightly bigger
than the caps of the original Blythe dolls
|