The head dome Set (2-pieces: including the exterior “the hard dome” and the interior “the hard-dome base”)
The dome set adopts a tough PP material to reduce the likelihood of fracturing during the disassembling of the product from the original manufacturer.
For SBL:
To be fixed with glue (Please note that residues from the disassembling should be cleaned up completely to avoid a bad sealing for the assembling. Do not use glue to fix the 2-piece set after the assembling to avoid difficulties to
disassemble the hard skull from the base because of the clinginess.
There are four small stubs to facilitate securing the wig and preventing the wig
(wigs size could use from 8.5~9.5') from shifting.
It has three mortises at the inside for the insertion of
“the hard dome base”. To complete the assembling, please make sure that the
mortises are matched precisely and passed through entirely. Additional gluing is
not required.
To disassemble, please
press down the front groove at the hard dome and sweep off with fingers the
hard-dome base, then the mortises can be detached easily. The same approach is
used on the two grooves at the back.
Note:
The size and details of the dome set have been modified, and thus they differ
from those of the original manufacturer. Please acknowledge this fact prior to
the purchase. Thank you.
A tiny space between the interior and the exterior may still exist after
assembling the 2-piece set. Please acknowledge this fact prior to the purchase.
Thank you.
Please be aware that a small degree of variance in color may exist in each
production. Please acknowledge this fact prior to the purchase.
|