A new material of soft PVC is used for the scalp. It has a natural and soft color tone with an elastic and skin-like touch. The sealing is much better and the tenderness is moderate, which makes hair sewing easy even without punched holes.

Suitable for Pullip Only.

Materials used: Environmental protection Soft PVC material (>> SGS test report reference <<)

Note：PVC materials have a bad smells when it is new. but smells will dissipate with time, Please make sure before order, thank you.

Direction:

It has three mortises at the inside for the insertion of the head dome base. To complete the assembling, please make sure that the mortises are matched precisely and passed through entirely.

Markings have been made to indicate the front and back of the cap. “F” denotes the front side and “B” denotes the back side. Please pay attention to these markings while sewing

The cap can be dyed (there are a wide variety of paints available, please try them out before applying it to the cap)

The key areas for optimal adhesion are the front and both sides at the base line near the edge of the cap

Note:

＊The size and details of the scalp have been modified, and thus they differ from those of the original manufacturer. Please acknowledge this fact prior to the purchase. Thank you.

＊Please be aware that a small degree of variance in color may exist in each production. Please acknowledge this fact prior to the purchase.

Caution:

＊Though the product is heat-resistant, do not place it near sources of extreme heat
＊Due to the characteristics of the materials used, the product may shrink under extreme heat
＊The cap has been remade of the original model; therefore it is slightly bigger than the caps of the original Pullip dolls