You think you
don’t need BI, PI chips?! No, you do!
Because BI, PI
chips are absolutely free to satisfy your creativity.
There are
flower, angle, unicorn, meteor, etc. in the eyes of your dolls.
There are cat
pupil, spade, diamond, heart and leaf pupil in the eyes of your dolls.
There is a
drawing in the eyes of your dolls.
BI, PI chips
make your imagination unlimited and come true
Are you
pursuing natural-look transparency of chips?
Do you like to change painting with various pigments and
color pens anytime?
Do you usually change patterns of chips according to your
moods?
Then you can try the chips made of “Glass” material: BI-G,
BD-G, PI-G
Glass material is able to be painted by user with more types
of pigments and tools.
It’s even allowed to use “nail polish” on it. No need to
worry corrosion.
You can even wash or soak chips in solvent as well.
Can’t wait to try it? Don’t miss Glass material chips!
( use reference )
The instruction below will help people who try to custom the chips for their
dolls.
You can adjust the steps based on your personally habits.
Design you like the iris
Recommended to use high gloss inkjet waterproof photo paper
and High level inkjet printer ( ex. laser inkjet printer )
first cut the iris or stick the chips then cut
The different type glue different results
Left side use oily glue ( printing color will be dark )
Right side use water-based glue
Stick the chips with paper when the glue rendered semi state
pressed of chips and paper until the glue dry
(Beware of small bubbles problem)
Check the chip's edges for residual material.
the chip may not be properly or evenly installed because the residual glue or paper.
Why is there this kind of chips: BI-P, PI-P (flat chip)
Because it’s difficult to settle pupil right on the middle of
chips
Because pupil looks not 3D enough, I want livelier eye
expression.
Then you need the flat chips.
New Blythe Acrylic Chips (Ⅱ) Custom Flat Chips
Since the
first-generation eye chips made their debut in 2006, we have received a lot of
praise and encouragement, for which we are sincerely grateful. This year, in
response to your kind support, we introduce the second generation of eye chips.
In addition to the brightness and transparency of the first generation, the
second generation has a higher refraction index for the patterns, so that
patterns generated by the refracted light can be easily seen from any viewing
angle. Aside from the groundbreaking pattern refracting technology, the
thickness and outer dimension of the chips are also reduced for a wider range of
applications and easier installation.
Details:
.Imagination is set free by the chip design that uses no protruding shafts.
.La conception des implants avec des tiges qui ne dépassent pas, laisse toute liberté à l’imagination.
.El diseño de los chips hace volar la imaginación, al no usar varillas que sobresalgan.
.凸棒レス設計により、創意工夫に制限なし
You can simply add stickers
to or even draw on the back of the chips to bring a personal touch to the
expression of the eyes. Please note that a chip should be placed with the flat
side down. If an ordinary sticker is used, pay attention to the direction in
which you apply the sticker. To secure a chip in place, apply glue to the rim of
the chip. Avoid damaging the paper with the pupil pattern on it while changing
the chip.
Vous pouvez simplement ajouter des autocollants ou même dessiner derrière l'implant pour donner une touche personnelle à l’expression du regard.
La face plane de l'implant est à placer vers le bas. Si l’autocollant utilisé est de type ordinaire, attention au sens d’application de l’autocollant.
Pour fixer l'implant en place, appliquez de la colle sur les bords de l'implant. Attention de ne pas endommager le papier qui porte le motif de la pupille, lorsque vous remplacez l'implant.
Puede añadir adhesivos o incluso hacer una marca en la parte posterior de los chips para darle un toque personal a la expresión de los ojos.
Por favor, recuerde que el chip debe colocarse con la parte plana hacia abajo. Si se usa un adhesivo normal, preste atención a la dirección en la que lo aplica.
Para asegurar la posición de un chip, aplique adhesivo en el borde del chip. Procure no dañar el papel con el patrón de la pupila mientras cambia el chip.
瞳片の裏面底部にシールを貼る、或いはパターンを描くことで、気軽にまた簡単にオリジナルの瞳を創り出すことができます。
瞳片の方向は平面を下に向け、一般的なシールをご使用される場合、シールの貼付方向にご注意ください。
固定する時、交換する時に瞳紋様紙が破れることを避けるため、接着剤を瞳片のふちにつけてください。
* The color of
picture would be incompletely similar with the real commodity due to the light
of photography scene, equipment and the hypothesis of computer.
* We'll try to remain the original color of the commodity as possible as we can.
Please understand this condition before order.
|